| Now you can quickly change
large belts without disassembling equipment. You can also design more
compact equipment. Made from four strands of cord instead of two,
this twisted belting can support greater loads while letting you use
smaller pulleys. For example, the minimum pulley diameter of a standard
1/2" round belt is 3", while that of a 1/2" double twisted belt is
only 1.5". Twin plastic or stainless steel hooks are staggered so
they do not rub against each other. The section with the hooks appears
thicker than the rest of the belt, but it necks down to the same size
when the belt is stretched and installed. Our twisted belting is available
in virtually any length, diameter, color and durometer. |
