Anti-Static Belts
Static Dissipative Belting
|
Anti-Static Belts
|
| New Cyclothane-SD urethane’s resistivity
is so low that it is classified as “static dissipative”
because it eliminates static faster than “anti-static”
materials. Consequently, our static dissipative belts work where
regular antistatic belts fail. |
- Probably the lowest resistivity of any solid urethane O-ring belt.
- Contains no carbon particles that can abrade off and short-out electronics.
- Resistivity remains constant -- will not decrease when belts age or are stretched.
- 90A durometer -- baby blue color.
- Recommended stretch is 10%.
- Water, Mold & UV resistant.
- A form of Cyclothane-E, but not food grade.
- Solid Cyclothane-SD belts:
- Volume resistivity 5 x 109 ohms-cm.
- Surface resistivity 5 x 109 ohms/sq.
- Static decay rate <0.01 seconds.
- Jacketed Cyclothane-SD Spring belts:
- Volume resistivity 5 x 107 ohms-cm.
- Surface resistivity 5 x 107 ohms/sq.
- Static decay rate <0.0001 seconds.
|
For the best
in anti static (antistatic) belts and static dissipative belting
insist on Dura-Belt. |
